Coated aluminum coil is a composite process using high-quality aluminum coil, plastics and adhesives. The product has the required flexural and flexural strength properties for decorative panels. In the four-season climate, changes in wind pressure, temperature, humidity and other factors will not cause bending, deformation, expansion, etc. Sometimes we will find scratches on the surface of the pre-painted aluminum coils, and these scratches are usually caused during transportation. Therefore, in order to avoid similar situations, it is necessary to talk about the matters needing attention in the transportation of color coated aluminum coils:
1. Color-coated aluminum coils should be transported in accordance with the state at the factory, and the original packaging cannot be disassembled at will.
2. When loading and unloading, a rubber pad should be added between the spreader and the product to prevent bumps, and special spreaders should be used under conditions.
3. The carriage of the transport vehicle should be cleaned, rubber pads or other protective devices should be laid on the floor of the carriage, and necessary protective measures should be taken around the carriage to prevent the packaging from indentation or bumps.
4. The aluminum coils of vertical packaging should also be kept vertical during transportation and handling.
5. The product should be fixed firmly to avoid relative movement or rolling during transportation, causing product damage or accidents.
6. The color-coated aluminum coil cannot be dragged when it is taken out to prevent the cutting and cutting of the hair from irritating the aluminum plate below. The aluminum plate should be handled with care, and do not touch other hard objects.
