The paint on the surface of the aluminum composite panel requires regular professional cleaning and maintenance. Such cleaning is not only to keep the walls of the building clean and beautiful, but to regularly remove the dirt accumulated on the surface of the paint that is harmful to the paint to ensure the long-term quality of the paint. The cleaning of building walls should be done manually or with appropriate cleaning equipment from top to bottom. Do not use any corrosive objects to scrub the painted surface.

The specific cleaning steps are as follows:
(1) First rinse the surface of the board with plenty of water
(2) Use a soft cloth soaked in detergent diluted with water to gently wipe the panel surface
(3) Rinse the panel with plenty of water to wash away the stolen goods

(4) Check the surface of the panel, and clean the areas that are not clean with detergent.
(5) Clean the surface of the board with clean water until the detergent is completely washed away. Do not clean the hot surface (when the temperature exceeds 40) when cleaning the aluminum composite panel, because the rapid evaporation of water is harmful to the baking paint of the board. Special attention should be paid to the selection of appropriate detergents. A basic principle is to choose sex detergents. Do not use strong alkaline detergents (such as sodium hydroxide, potassium hydroxide or sodium carbonate), strong acid detergents, corrosive detergents, and paint-soluble detergents. In addition, before cleaning a large area, it is best to select a small board for testing, and then start formally after confirming the safety.

