Comprehensive Comparative Analysis Of FR A2 Aluminium Composite Panel VS. FR B1 Aluminium Composite Panel

Mar 31, 2025

Leave a message

FR A2 ACP VS FR B1 fireproof ACP

 

1. In-depth analysis of mineral core layer composition

1) Mineral composition of FR A2 fireproof aluminum composite panel

The mineral content of the core layer of FR A2 fireproof aluminum composite panel is usually between 80% and 95%, mainly composed of the following components:

- Aluminum hydroxide (ATH): 45-55%, decomposition temperature 180-200℃, heat absorption 1970J/g

- Magnesium hydroxide (MDH): 25-35%, decomposition temperature 340-490℃, heat absorption 1300J/g

- Modified silicate: 10-15%, enhance structural stability

- Nano-grade clay: 5-8%, improve barrier properties

- Zinc borate complex: 3-5%, synergistic flame retardant effect

Innovative process features:

Adopting layered gradient filling technology, nano clay (content up to 12%) is concentratedly distributed in the 5mm area of ​​the surface, the middle layer maintains a high ATH content, and the bottom layer strengthens the MDH distribution to form a three-dimensional fire barrier.

 

FR A2 ACP VS FR B1 ACP

 

2) Comparison of mineral composition of Grade B1 fireproof aluminum composite panels

The mineral content of typical Grade B1 aluminum composite panels is in the range of 50-70%:

- Aluminum hydroxide: 30-40%

- Magnesium hydroxide: 15-20%

- Organic phosphorus flame retardant: 8-12%

- Calcium carbonate filler: 10-15%

- Other additives: 5-8%

 

FR A2 fireproof aluminum composite panel VS FR B1 fireproof aluminum composite panel

 

Core differences:

(1) Grade A2 completely abandons organic flame retardants, while Grade B1 still relies on some organic phosphorus compounds

(2) Grade A2 uses higher purity mineral raw materials (purity ≥ 99%)

(3) Grade A2 adds nano-grade modified materials to improve density

(4) Grade B1 uses calcium carbonate as filler to reduce costs

 

FR A2 fireproof aluminum composite panel Testing

 

2. Quantitative comparison of fire protection performance

1) Comparison table of key performance indicators

| Test items | FR A2 standard value | B1 standard value | Performance improvement |

| Combustion heat value (MJ/kg) | ≤3.0 | ≤8.2 | 63%↓ |

| Smoke density rating (SDR) | ≤50 | ≤75 | 33%↓ |

| Critical thermal radiation flux (kW/m²) | ≥15 | ≥8 | 87.5%↑ |

| Smoke toxicity (LC50) | ≥25mg/L | ≥15mg/L | 66%↑ |

| Flame spread index | ≤20 | ≤60 | 66%↓ |

| 600℃ residual weight rate | ≥85% | ≥60% | 41.7%↑ |

 

FR A2 aluminium composite panel Test

 

2) Comparison of simulations of key test scenarios

(1) Full-scale room fire test (ISO 9705):

- Grade A2 No flashover occurred within 15 minutes, maximum heat release rate 1.8MW

- Grade B1: Flashover occurred after 8 minutes, peak heat release reached 4.2MW

(2) Cone calorimetry test (50kW/m²):

- Grade A2 Peak heat release rate (PHRR) 45kW/m²

- Grade B1: PHRR reached 110kW/m²

(3) Vertical combustion test (UL94):

- Grade A2: Reached V-0 level (self-extinguishing within 1 second)

- Grade B1: V-1 level (self-extinguishing within 30 seconds)

 

3) Differences in fire protection mechanisms

Grade A2 triple protection mechanism:

(1) Physical barrier: Nano-clay forms a dense carbonized layer (expansion coefficient of 8-10 times)

(2) Chemical endothermic: Double hydroxide decomposes and absorbs 2.8MJ/kg of heat

(3) Gas phase flame retardant: Releases water vapor to dilute oxygen concentration (volume share of 35%)

 

Grade B1 protection features:

(1) Organic phosphorus decomposes to generate PO·free radicals to interrupt chain reactions

(2) Calcium carbonate decomposes and absorbs heat (178kJ/mol)

(3) Relying on material carbonization to delay combustion

 

B1-Fireproof-aluminium-composite-material

 

3. Comprehensive performance comparison

1) Physical and mechanical properties

(1) Flexural strength:

- Grade A2: ≥85MPa (ASTM D790)

- Grade B1: ≤60MPa

(2) Thermal expansion coefficient:

- Grade A2: 23×10⁻⁶/℃

- Grade B1: 45×10⁻⁶/℃

(3) Weather resistance (QUV 3000h):

- Grade A2 color difference ΔE≤2.0

- Grade B1 ΔE≥4.5

 

2) Environmental performance

(1) VOC emissions:

- A2: ≤50μg/m³ (ISO 16000)

- B1: 200-300μg/m³

(2) Heavy metal content:

- A2 complies with EN71-3 children's toy standard

- B1 contains trace antimony compounds (0.1-0.3%)

3) Economic analysis

(1) Initial cost:

- A2 unit price: $23-33/㎡

- B1 unit price: $16-18/㎡

(2) Life cycle cost (20 years):

- A2 maintenance cost is 40% lower

- Insurance cost difference can reach 30%

- Increased space utilization due to extended fire resistance period

 

FR A2 aluminum composite panel Testing

 

4. Application scenario decision model

It is recommended to use the fire risk assessment matrix for selection:

| Risk level | Population density | Fire load | Recommended level | Applicable scenario case |

| Extremely high risk (Class I) | >5 people/㎡ | >800MJ/m²| A2 | Subway platform, hospital ICU, data center |

| High risk (Class II) | 3-5 people/㎡ | 500-800 | A2/B1+ | Commercial complex, school teaching building |

| Medium risk (Class III) | 1-3 people/㎡ | 300-500 | B1 | Office building, hotel room |

| Low risk (Class IV) | <1 person/㎡ | <300 | B2 | Warehousing facilities, factory buildings |

 

A2-Fireproof-Core-aluminum-composite-board

 

5. Technology Development Trends

1. Research and development direction of the new generation of A2+ grade materials:

- Graphene modified mineral fillers (thermal conductivity reduced by 40%)

- Self-healing fire retardant coating (crack self-healing at 600°C)

- Phase change energy storage material integration (increase thermal inertia by 30%)

2. Intelligent manufacturing breakthroughs:

- Mineral filler AI ratio system (real-time optimization of flame retardant efficiency)

- Microwave curing process (production energy consumption reduced by 25%)

- Online thermal imaging quality inspection (defect detection rate 99.99%)

 

Aluminium-Composite-Fireproof-Panel

 

6. Engineering Application Recommendations

1) Special node treatment:

(1) Ceramic fiber tape + intumescent fireproof sealant should be used at the joints

(2) A2-grade heat-resistant stainless steel screws (melting point ≥1500℃) should be used for fixings

(3) Curved surfaces should be treated with secondary fireproof coatings

 

2) Maintenance and inspection specifications:

(1) Quarterly infrared thermal imaging inspection (temperature difference >5℃ requires warning)

(2) Annual sampling inspection of mineral crystallinity (XRD analysis)

(3) Fireproof performance re-inspection every 5 years (sampling rate ≥3%)

 

FR A2 fireproof aluminum composite panel project

 

Conclusion:

FR A2 fireproof aluminum composite panel has achieved a qualitative leap in fireproof performance compared to Grade B1 through optimized mineral ratio and structural design. Its combustion calorific value is reduced by 63% and its smoke toxicity is improved by 66%. It is an ideal choice for meeting stringent fire protection requirements. In actual engineering applications, it is necessary to scientifically select the building based on the building risk level, usage function and life cycle cost, while paying attention to the performance improvement brought by the development of emerging technologies. With the continuous improvement of building safety standards, A2-grade materials are rapidly penetrating from special places to high-end civilian fields, leading the technological innovation of fire-proof building materials.