How To Calculate The Number Of Materials Required For The Aluminum Composite Panel Curtain Wall

Jan 09, 2022

Leave a message

In an aluminum composite panel curtain wall project, we often have to calculate what materials and quantities are needed according to the area before ordering materials for construction. The calculation methods of curtain walls of different materials are different. Today, we will introduce to you, the installation of aluminum composite panels on the curtain wall requires Calculation of materials and quantities.

 

Aluminum composite panel: The size of aluminum-plastic composite panel is calculated in square meters. When calculating the cutting rate of the aluminum composite panel, the folding edge is generally considered as 25mm. (Arc surface and special-shaped aluminum plate are counted separately)

 

Aluminum keel: Calculate the length of various aluminum materials by specification and multiply the linear density to calculate the weight in kilograms.

 

Aluminum attached frame and reinforcing ribs: usually use aluminum square pass, angle aluminum, slot aluminum, etc., calculated by weight; according to the empirical value of 1.5~2.5kg/m2.

 

Steel: First calculate the length according to the specifications, and then convert it into the weight in kilograms.

 

3M tape: The aluminum frame and reinforcing ribs are usually pasted with 3MVHB tape (thickness 1.1, width 15~25) and the aluminum plate, calculated according to the extension meter of the tape, and the empirical value is 2~4m/m2.

 

Embedded parts and angle steel supports: Calculate the number of blocks according to their specifications, and then calculate their weight.

 

Thermal insulation rock wool: Calculated in cubic meters according to the design diagram.

 

Sealant: first calculate the length of different glue seams according to the figure, and then convert it into counts to calculate (usually, 500ml of sealant can be used to make 16mm wide glue seam for 3 meters, and 592ml of sealant can be used to make 16mm wide glue seam. 3.5 meters). Or calculate according to the following method: glue seam width (mm) * glue seam thickness (mm) (the thickness is calculated by 10mm or half of the width) * glue seam length (m) / volume of each glue (ml) = glue count.

 

Other materials: including foam rods, textured paper, rubber pads, isolation gaskets, welding rods, anti-rust paint, etc., usually calculated by one item, usually calculated at 1.5~2 USD/m2.



How to install aluminum composite panel

How-to-install-aluminum-composite-panel


Aluminum-angleALUMINIUM POP RIVETSALUMINIUM-RECTANGULAR-TUBES

small-aluminum-sheet

tape

SILICONE

construction-material

Aluminum-Alloy-Keel

Curtain-wall-aluminum-composite-panel