(1) Characteristics of 4xxx series aluminum alloys
4xxx series aluminum alloys are aluminum alloys with Si as the main alloying element. Most of them are non-strengthenable aluminum alloys by heat treatment. Only alloys containing Cu, Mg and Ni can be strengthened by heat treatment. This series of alloys are mainly used as additives for aluminum alloy welding, such as brazing plates, welding rods and welding wires, because of their high Si content, low melting point, good melt fluidity, easy shrinkage compensation and no brittleness in the final product. In addition, due to the good wear resistance and high temperature performance of some alloys in this series, they are also used to manufacture pistons and heat-resistant parts. Alloys containing about 5% silicon are black-gray after anodizing, so they are suitable for building materials and manufacturing decorative parts.
(2) Main alloying and impurity elements and their roles
Si: Si is the main alloying component in this series of alloys, with a minimum content of 4.5% and a maximum content of 13.5%. Si exists in the alloy mainly in the form of a+Si eutectic and β(Al5FeSi). As the Si content increases, the eutectic increases, the fluidity of the alloy melt increases, and the strength and wear resistance of the alloy also increase.
Ni and Fe: Ni and Fe can form intermetallic compounds that are insoluble in aluminum, which can improve the high-temperature strength and hardness of the alloy without reducing its linear expansion coefficient.
Cu and Mg: Cu and Mg can generate Mg2Si, CuAl2 and S phases, improving the strength of the alloy.
Cr and Ti: Cr and Ti can refine the grains and improve the airtightness of the alloy.
What are the types and typical uses of 4xxx series aluminum alloys?
Alloy Type Use
4A11 Forgings Pistons and heat-resistant parts
4A13 Plates Plate and strip brazing materials, radiator brazing plates and foil brazing layers
4A17 Plates Plate and strip brazing materials, radiator brazing plates and foil brazing layers
4032 Forgings Pistons and heat-resistant parts
4043 Wires and plates Aluminum alloy welding fillers, such as welding strips, welding rods, welding wires
4004 Plates Brazing plates, radiator brazing plates and foil brazing layers
